HOME > SPAR > High Series Mixer
Demo Video
SP-500A / SP-502A
| Motor | 750W, grease packed ball bearing, air-cooled, 110V/60Hz, 220V/50Hz, Single phase |
| Controls | Spar Mixer controls are top-mounted to give easy access in cramped kitchen environments. |
| Cord and Plug | Single phase are hard wired. |
| Transmission | The unique design yields high-torque mixing power while avoiding the high cost encountered repairing direct-drive transmission components. |
| Speeds: | 1. 1st gear 40 rpm 2. 2nd gear 70 rpm 3. 3rd gear 90 rpm 4. 4th gear 106 rpm 5. 5th gear 140 rpm 6. 6th gear 170 rpm 7. 7th gear 190 rpm 8. 8th gear 210 rpm 9. 9th gear 230 rpm 10. 10th gear 260 rpm |
| Bowls and Agitators | Standard equipment includes a 5Litres high quality stainless steel bowl, dough hook, flat beater, and whip. A sturdy hand lever on the body column raises and lowers the bowl as well as locking in place at the top and bottom positions. |
| Finish | White epoxy enamel |
| Shipping Information | N.W. 15 kgsG.W. 16 kgs |
| Size: (L x W x H) | 40cm x 31cm x 45.5cm |
FEATURES
➤
Cartons are affixed to an undersized skid (pallet), the weight and dimensions of this skid are not included above and may vary from shipment to shipment.
SP-100A
| Motor | 1/3 h.p., (250W) grease packed ball bearing, air-cooled, 230V/50Hz/1Ph |
| Controls | Spar Mixer controls are front-mounted to give easy access in cramped kitchen environments. The following controls are standard on all Spar Mixers: separate start and emergency stop buttons so operators can shut down the mixer immediately in an emergency situation, and thermal overload protection |
| Cord and Plug | 6 ft. flexible three wire cord and ground prong. |
| Transmission | Heat-treated, hardened alloy, precision milled gears operate with planetary action. Gears are packed in a long-lasting, high pressure grease. Planetary gears are driven by direct linkage to the motor drive shaft. This design yields high-torque mixing power. |
| Speeds: | (Agitator rpm), (Hub rpm’s) 1. Low Speed 106, 59 2. Intermediate Speed 196, 110 3. High Speed 358, 201 |
| Bowls and Agitators | Standard equipment includes a 10Qt. (9.5Litres) high quality stainless steel bowl, dough hook, flat beater, and whip. A sturdy hand lever on the body column raises and lowers the bowl as well as locking in place at the top and bottom positions. |
| Attachment | Standard is the No. 12 hub for powering a standard size vegetable slicer/cheese shredder and a standard size meat mincer/grinder. |
| Finish | Top (transmission cover): metallic bronze epoxy enamel Bottom : metallic gray epoxy enamel |
| Shipping Information | N.W. 15 kgsN.W. 65kgs G.W. 80kgs |
| Size: (L x W x H) | Depth x Width x Height 46cm x 45cm x 76cm |
FEATURES
➤
Cartons are affixed to an undersized skid (pallet), the weight and dimensions of this skid are not included above and may vary from shipment to shipment.
SP-200A
| Motor | 1/2 h.p., (370W) grease packed ball bearing, air-cooled, 230V/50Hz/1Ph |
| Controls | Spar Mixer controls are front-mounted to give easy access in cramped kitchen environments. The following controls are standard on all Spar Mixers: separate start and emergency stop buttons so operators can shut down the mixer immediately in an emergency situation, and thermal overload protection |
| Cord and Plug | 6 ft. flexible three wire cord and ground prong. |
| Transmission | Heat-treated, hardened alloy, precision milled gears operate with planetary action. Gears are packed in a long-lasting, high pressure grease. Planetary gears are driven by direct linkage to the motor drive shaft. This design yields high-torque mixing power. |
| Speeds: | (Agitator rpm), (Hub rpm’s) 1. Low Speed 106, 59 2. Intermediate Speed 196, 110 3. High Speed 358, 201 |
| Bowls and Agitators | Standard equipment includes a 20Qt. (19Litres) high quality stainless steel bowl, dough hook, flat beater, and whip. A sturdy hand lever on the body column raises and lowers the bowl as well as locking in place at the top and bottom positions. |
| Attachment | Standard is the No. 12 hub for powering a standard size vegetable slicer/cheese shredder and a standard size meat mincer/grinder.. |
| Finish | Top (transmission cover): metallic bronze epoxy enamel Bottom : metallic gray epoxy enamel |
| Shipping Information | N.W. 80kgs G.W. 100kgs |
| Size: (L x W x H) | Depth x Width x Height 53cm x 52cm x 87cm |
FEATURES
➤
Cartons are affixed to an undersized skid (pallet), the weight and dimensions of this skid are not included above and may vary from shipment to shipment.shipment to shipment.
SP-22HA
| Motor | 3/4 h.p. (550W), grease packed ball bearing, air-cooled, 230V/50Hz/1Ph | ||
| Controls | Spar Mixer controls are front-mounted to give easy access in cramped kitchen environments. The following controls are standard on all Spar Mixers: separate start and emergency stop buttons so operators can shut down the mixer immediately in an emergency situation, a 15-minute timer which shuts off the machine after set time has elapsed, and thermal overload protection | ||
| Cord and Plug | 6 ft. flexible three wire cord and ground prong. | ||
| Transmission | Heat-treated, hardened alloy, precision milled gears operate with planetary action. Gears are packed in a long-lasting, high pressure grease. Planetary gears are driven by an oversized cog-wheel, which is in turn driven by a cogged belt powered by the motor drive shaft. Cogged belt is a long-lasting, rugged fibre/rubber composite. This unique design yields high-torque mixing power while avoiding the high cost encountered repairing direct-drive transmission components. | ||
| Speeds |
| ||
| Bowls and Agitators | Standard equipment includes a 24Qt. (23.75Litres) high quality stainless steel bowl, dough hook, flat beater, and whip. A sturdy hand lever on the body column raises and lowers the bowl as well as locking in place at the top and bottom positions. | ||
| Attachment | Standard is the No. 12 hub for powering a standard size vegetable slicer/cheese shredder and a standard size meat mincer/grinder. | ||
| Finish | Top (transmission cover): metallic bronze epoxy enamel Bottom : metallic gray epoxy enamel | ||
| Shipping Information | N.W. 110kgsG.W. 140kgs | ||
| Size: (L x W x H) | Depth x Width x Height 56cm x 55cm x 91cm |
FEATURES
➤
Cartons are affixed to an undersized skid (pallet), the weight and dimensions of this skid are not included above and may vary from shipment to shipment.
SP-30HA
| Motor | 1 h.p. (750W), grease packed ball bearing, air-cooled, 230V/50Hz/1Ph, 220V/380V/50Hz/3Ph |
| Controls | Spar Mixer controls are front-mounted to give easy access in cramped kitchen environments. The following controls are standard on all Spar Mixers: separate start and emergency stop buttons so operators can shut down the mixer immediately in an emergency situation, a 15-minute timer which shuts off the machine after set time has elapsed, and thermal overload protection |
| Cord and Plug | 6 ft. flexible three wire cord and ground prong. |
| Transmission | Heat-treated, hardened alloy, precision milled gears operate with planetary action. Gears are packed in a long-lasting, high pressure grease. Planetary gears are driven by an oversized cog-wheel, which is in turn driven by a cogged belt powered by the motor drive shaft. Cogged belt is a long-lasting, rugged fibre/rubber composite. This unique design yields high-torque mixing power while avoiding the high cost encountered repairing direct-drive transmission components. |
| Speeds: | (Agitator rpm), (Slicer/Grinder rpm) 1. Low Speed 99, 69 2. Intermediate Speed 176, 123 3. High Speed 320, 224 |
| Bowls and Agitators | Standard equipment includes a 30Qt. (30L) high quality stainless steel bowl, dough hook, flat beater, and whip. A sturdy hand lever on the body column raises and lowers the bowl as well as locking in place at the top and bottom positions. |
| Attachment | Standard is the No. 12 hub for powering a standard size vegetable slicer/cheese shredder and a standard size meat mincer/grinder. |
| Finish | Top (transmission cover): metallic bronze epoxy enamel Bottom : metallic gray epoxy enamel |
| Shipping Information | N.W. 180kgsG.W. 210kgs |
| Size: (L x W x H) | Depth x Width x Height 67cm x 55cm x 117cm |
FEATURES
➤
Cartons are affixed to an undersized skid (pallet), the weight and dimensions of this skid are not included above and may vary from shipment to shipment.
SP-40HA
| Motor | 1.5 h.p. (1200W), grease packed ball bearing, air-cooled, 230V/50Hz/1Ph, 220V/380V/3Ph | ||
| Controls | Spar Mixer controls are front-mounted to give easy access in cramped kitchen environments. The following controls are standard on all Spar Mixers: separate start and emergency stop buttons so operators can shut down the mixer immediately in an emergency situation, a 15-minute timer which shuts off the machine after set time has elapsed, and thermal overload protection | ||
| Cord and Plug | Both single phase and three phase are hard wired | ||
| Transmission | Heat-treated, hardened alloy, precision milled gears operate with planetary action. Gears are packed in a long-lasting, high pressure grease. Planetary gears are driven by an oversized cog-wheel, which is in turn driven by a cogged belt powered by the motor drive shaft. Cogged belt is a long-lasting, rugged fibre/rubber composite. This unique design yields high-torque mixing power while avoiding the high cost encountered repairing direct-drive transmission components. | ||
| Speeds |
| ||
| Bowls and Agitators | Standard equipment includes a 40Qt. (40L) high quality stainless steel bowl, dough hook, flat beater, and whip. A sturdy hand lever on the body column raises and lowers the bowl as well as locking in place at the top and bottom positions. | ||
| Attachment | Standard is the No. 12 hub for powering a standard size vegetable slicer/cheese shredder and a standard size meat mincer/grinder. | ||
| Finish | Top (transmission cover): metallic bronze epoxy enamel Bottom : metallic gray epoxy enamel | ||
| Shipping Information | N.W. 250kgs G.W. 290kgs | ||
| Size: (L x W x H) | Depth x Width x Height 75cm x 65cm x 131cm |
FEATURES
➤
Cartons are affixed to an undersized skid (pallet), the weight and dimensions of this skid are not included above and may vary from shipment to shipment.
SP-50HA
| Motor | 2 h.p. (1500W), grease packed ball bearing, air-cooled, 230V/50Hz/1Ph, 220V/380V/3Ph | ||
| Controls | Spar Mixer controls are front-mounted to give easy access in cramped kitchen environments. The following controls are standard on all Spar Mixers: separate start and emergency stop buttons so operators can shut down the mixer immediately in an emergency situation, a 15-minute timer which shuts off the machine after set time has elapsed, and thermal overload protection | ||
| Cord and Plug | Both single phase and three phase are hard wired | ||
| Transmission | Heat-treated, hardened alloy, precision milled gears operate with planetary action. Gears are packed in a long-lasting, high pressure grease. Planetary gears are driven by an oversized cog-wheel, which is in turn driven by a cogged belt powered by the motor drive shaft. Cogged belt is a long-lasting, rugged fibre/rubber composite. This unique design yields high-torque mixing power while avoiding the high cost encountered repairing direct-drive transmission components. | ||
| Speeds |
| ||
| Bowls and Agitators | Standard equipment includes a 50Qt. (50L) high quality stainless steel bowl, dough hook, flat beater, and whip. A sturdy hand lever on the body column raises and lowers the bowl as well as locking in place at the top and bottom positions. | ||
| Attachment | Standard is the No. 12 hub for powering a standard size vegetable slicer/cheese shredder and a standard size meat mincer/grinder. | ||
| Finish | Top (transmission cover): metallic bronze epoxy enamel Bottom : metallic gray epoxy enamel | ||
| Shipping Information | N.W. 270kgs G.W. 310kgs | ||
| Size: (L x W x H) | Depth x Width x Height 75cm x 65cm x 131cm |
FEATURES
➤
Cartons are affixed to an undersized skid (pallet), the weight and dimensions of this skid are not included above and may vary from shipment to shipment.
SP-60HA
| Motor | 3 h.p. (1500W), grease packed ball bearing, air-cooled, 230V/50Hz/1Ph, 220V/380V/3Ph |
| Controls | Spar Mixer controls are front-mounted to give easy access in cramped kitchen environments. The following controls are standard on all Spar Mixers: separate start and emergency stop buttons so operators can shut down the mixer immediately in an emergency situation, a 15-minute timer which shuts off the machine after set time has elapsed, and thermal overload protection |
| Cord and Plug | Both single phase and three phase are hard wired |
| Transmission | Heat-treated, hardened alloy, precision milled gears operate with planetary action. Gears are packed in a long-lasting, high pressure grease. Planetary gears are driven by an oversized cog-wheel, which is in turn driven by a cogged belt powered by the motor drive shaft. Cogged belt is a long-lasting, rugged fibre/rubber composite. This unique design yields high-torque mixing power while avoiding the high cost encountered repairing direct-drive transmission components. |
| Speeds: | (Agitator rpm), (Slicer/Grinder rpm) 1. Low Speed 99, 60 2. Intermediate Speed 176, 108 3. High Speed 320, 197 |
| Bowls and Agitators | Standard equipment includes a 60Qt. (60L) high quality stainless steel bowl, dough hook, flat beater, and whip. A sturdy hand lever on the body column raises and lowers the bowl as well as locking in place at the top and bottom positions. |
| Attachment | Standard is the No. 12 hub for powering a standard size vegetable slicer/cheese shredder and a standard size meat mincer/grinder. |
| Finish | Top (transmission cover): metallic bronze epoxy enamel Bottom : metallic gray epoxy enamel |
| Shipping Information | N.W. 270kgs G.W. 310kgs |
| Size: (L x W x H) | Depth x Width x Height 75cm x 65cm x 131cm |
FEATURES
➤
Cartons are affixed to an undersized skid (pallet), the weight and dimensions of this skid are not included above and may vary from shipment to shipment.
SP-A80HI / SP-B80HI
| Motor | 3 h.p. (1/8HP:automatic:optional), grease packed ball bearing, air-cooled,220/380/415V/60HZ,3PH | ||
| Controls | Spar Mixer controls are front-mounted to give easy access in cramped kitchen environments. The following controls are standard on all Spar Mixers: separate start and emergency stop buttons so operators can shut down the mixer immediately in an emergency situation, a 15-minute timer which shuts off the machine after set time has elapsed, and thermal overload protection | ||
| Cord and Plug | 6 ft. flexible three wire cord and ground prong. | ||
| Transmission | Heat-treated, hardened alloy, precision milled gears operate with planetary action. Gears are packed in a long-lasting, high pressure grease. Planetary gears are driven by an oversized cog-wheel, which is in turn driven by a cogged belt powered by the motor drive shaft. Cogged belt is a long-lasting, rugged fibre/rubber composite. This unique design yields high-torque mixing power while avoiding the high cost encountered repairing direct-drive transmission components. | ||
| Speeds |
| ||
| Bowls and Agitators | Standard equipment includes a 80 Qt. (I.D.50 x H46.8 x TH2 cm) high quality stainless steel bowl, dough hook, flat beater, and whip. A sturdy hand lever on the body column raises and lowers the bowl as well as locking in place at the top and bottom positions. | ||
| Attachment | Hub, Meat Mincer, Vegetable Slicer Standard is the No. 12 hub for powering a standard size vegetable slicer/cheese shredder and a standard size meat mincer/grinder. | ||
| Finish | Top (transmission cover): metallic bronze epoxy enamel Bottom : metallic gray epoxy enamel | ||
| Shipping Information | Gross 455 kg Net 550 kg | ||
| Size: (L x W x H) | Depth x Width x Height 108cm x 79cm x 156cm |
FEATURES
➤
Cartons are affixed to an undersized skid (pallet), the weight and dimensions of this skid are not included above and may vary from shipment to shipment.shipment to shipment.
JMCool Solutions Inc. All Rights Reserved, Copyright 2017
Sitemap Philippines
