HOME > SPAR > High Series Mixer

Demo Video





SP-500A / SP-502A

Motor750W, grease packed ball bearing, air-cooled, 110V/60Hz, 220V/50Hz, Single phase
ControlsSpar Mixer controls are top-mounted to give easy access in cramped kitchen environments.
Cord and PlugSingle phase are hard wired.
TransmissionThe unique design yields high-torque mixing power while avoiding the high cost encountered repairing direct-drive transmission components.
Speeds:1. 1st gear 40 rpm
2. 2nd gear 70 rpm
3. 3rd gear 90 rpm
4. 4th gear 106 rpm
5. 5th gear 140 rpm
6. 6th gear 170 rpm
7. 7th gear 190 rpm
8. 8th gear 210 rpm
9. 9th gear 230 rpm
10. 10th gear 260 rpm
Bowls and AgitatorsStandard equipment includes a 5Litres high quality stainless steel bowl, dough hook, flat beater, and whip. A sturdy hand lever on the body column raises and lowers the bowl as well as locking in place at the top and bottom positions.
FinishWhite epoxy enamel
Shipping InformationN.W. 15 kgs
G.W. 16 kgs
Size: (L x W x H)40cm x 31cm x 45.5cm
FEATURES


Cartons are affixed to an undersized skid (pallet), the weight and dimensions of this skid are not included above and may vary from shipment to shipment.






SP-100A

Motor1/3 h.p., (250W) grease packed ball bearing, air-cooled, 230V/50Hz/1Ph
ControlsSpar Mixer controls are front-mounted to give easy access in cramped kitchen environments. The following controls are standard on all Spar Mixers: separate start and emergency stop buttons so operators can shut down the mixer immediately in an emergency situation, and thermal overload protection
Cord and Plug6 ft. flexible three wire cord and ground prong.
TransmissionHeat-treated, hardened alloy, precision milled gears operate with planetary action. Gears are packed in a long-lasting, high pressure grease. Planetary gears are driven by direct linkage to the motor drive shaft. This design yields high-torque mixing power.
Speeds:(Agitator rpm), (Hub rpm’s)
1. Low Speed 106, 59
2. Intermediate Speed 196, 110
3. High Speed 358, 201
Bowls and AgitatorsStandard equipment includes a 10Qt. (9.5Litres) high quality stainless steel bowl, dough hook, flat beater, and whip. A sturdy hand lever on the body column raises and lowers the bowl as well as locking in place at the top and bottom positions.
AttachmentStandard is the No. 12 hub for powering a standard size vegetable slicer/cheese shredder and a standard size meat mincer/grinder.
FinishTop (transmission cover): metallic bronze epoxy enamel
Bottom : metallic gray epoxy enamel
Shipping InformationN.W. 15 kgs
N.W. 65kgs G.W. 80kgs
Size: (L x W x H)Depth x Width x Height 46cm x 45cm x 76cm
FEATURES


Cartons are affixed to an undersized skid (pallet), the weight and dimensions of this skid are not included above and may vary from shipment to shipment.




SP-200A

Motor1/2 h.p., (370W) grease packed ball bearing, air-cooled, 230V/50Hz/1Ph
ControlsSpar Mixer controls are front-mounted to give easy access in cramped kitchen environments. The following controls are standard on all Spar Mixers: separate start and emergency stop buttons so operators can shut down the mixer immediately in an emergency situation, and thermal overload protection
Cord and Plug6 ft. flexible three wire cord and ground prong.
TransmissionHeat-treated, hardened alloy, precision milled gears operate with planetary action. Gears are packed in a long-lasting, high pressure grease. Planetary gears are driven by direct linkage to the motor drive shaft. This design yields high-torque mixing power.
Speeds:(Agitator rpm), (Hub rpm’s)
1. Low Speed 106, 59
2. Intermediate Speed 196, 110
3. High Speed 358, 201
Bowls and AgitatorsStandard equipment includes a 20Qt. (19Litres) high quality stainless steel bowl, dough hook, flat beater, and whip. A sturdy hand lever on the body column raises and lowers the bowl as well as locking in place at the top and bottom positions.
AttachmentStandard is the No. 12 hub for powering a standard size vegetable slicer/cheese shredder and a standard size meat mincer/grinder..
FinishTop (transmission cover): metallic bronze epoxy enamel
Bottom : metallic gray epoxy enamel
Shipping InformationN.W. 80kgs
G.W. 100kgs
Size: (L x W x H)Depth x Width x Height
53cm x 52cm x 87cm
FEATURES


Cartons are affixed to an undersized skid (pallet), the weight and dimensions of this skid are not included above and may vary from shipment to shipment.shipment to shipment.




SP-22HA

Motor3/4 h.p. (550W), grease packed ball bearing, air-cooled, 230V/50Hz/1Ph
ControlsSpar Mixer controls are front-mounted to give easy access in cramped kitchen environments. The following controls are standard on all Spar Mixers: separate start and emergency stop buttons so operators can shut down the mixer immediately in an emergency situation, a 15-minute timer which shuts off the machine after set time has elapsed, and thermal overload protection
Cord and Plug6 ft. flexible three wire cord and ground prong.
TransmissionHeat-treated, hardened alloy, precision milled gears operate with planetary action. Gears are packed in a long-lasting, high pressure grease. Planetary gears are driven by an oversized cog-wheel, which is in turn driven by a cogged belt powered by the motor drive shaft. Cogged belt is a long-lasting, rugged fibre/rubber composite. This unique design yields high-torque mixing power while avoiding the high cost encountered repairing direct-drive transmission components.
Speeds
(Agitator rpm)
1. Low Speed 108
2. Intermediate Speed 183
3. High Speed 352
(Hub rpm)
1. Low Speed 57
2. Intermediate Speed 105
3. High Speed 202
Bowls and AgitatorsStandard equipment includes a 24Qt. (23.75Litres) high quality stainless steel bowl, dough hook, flat beater, and whip. A sturdy hand lever on the body column raises and lowers the bowl as well as locking in place at the top and bottom positions.
AttachmentStandard is the No. 12 hub for powering a standard size vegetable slicer/cheese shredder and a standard size meat mincer/grinder.
FinishTop (transmission cover): metallic bronze epoxy enamel
Bottom : metallic gray epoxy enamel
Shipping InformationN.W. 110kgs
G.W. 140kgs
Size: (L x W x H)Depth x Width x Height
56cm x 55cm x 91cm
FEATURES


Cartons are affixed to an undersized skid (pallet), the weight and dimensions of this skid are not included above and may vary from shipment to shipment.




SP-30HA

Motor1 h.p. (750W), grease packed ball bearing, air-cooled, 230V/50Hz/1Ph, 220V/380V/50Hz/3Ph
ControlsSpar Mixer controls are front-mounted to give easy access in cramped kitchen environments. The following controls are standard on all Spar Mixers: separate start and emergency stop buttons so operators can shut down the mixer immediately in an emergency situation, a 15-minute timer which shuts off the machine after set time has elapsed, and thermal overload protection
Cord and Plug6 ft. flexible three wire cord and ground prong.
TransmissionHeat-treated, hardened alloy, precision milled gears operate with planetary action. Gears are packed in a long-lasting, high pressure grease. Planetary gears are driven by an oversized cog-wheel, which is in turn driven by a cogged belt powered by the motor drive shaft. Cogged belt is a long-lasting, rugged fibre/rubber composite. This unique design yields high-torque mixing power while avoiding the high cost encountered repairing direct-drive transmission components.
Speeds:(Agitator rpm), (Slicer/Grinder rpm)
1. Low Speed 99, 69
2. Intermediate Speed 176, 123
3. High Speed 320, 224
Bowls and AgitatorsStandard equipment includes a 30Qt. (30L) high quality stainless steel bowl, dough hook, flat beater, and whip. A sturdy hand lever on the body column raises and lowers the bowl as well as locking in place at the top and bottom positions.
AttachmentStandard is the No. 12 hub for powering a standard size vegetable slicer/cheese shredder and a standard size meat mincer/grinder.
FinishTop (transmission cover): metallic bronze epoxy enamel
Bottom : metallic gray epoxy enamel
Shipping InformationN.W. 180kgs
G.W. 210kgs
Size: (L x W x H)Depth x Width x Height
67cm x 55cm x 117cm
FEATURES


Cartons are affixed to an undersized skid (pallet), the weight and dimensions of this skid are not included above and may vary from shipment to shipment.




SP-40HA

Motor1.5 h.p. (1200W), grease packed ball bearing, air-cooled, 230V/50Hz/1Ph, 220V/380V/3Ph
ControlsSpar Mixer controls are front-mounted to give easy access in cramped kitchen environments. The following controls are standard on all Spar Mixers: separate start and emergency stop buttons so operators can shut down the mixer immediately in an emergency situation, a 15-minute timer which shuts off the machine after set time has elapsed, and thermal overload protection
Cord and PlugBoth single phase and three phase are hard wired
TransmissionHeat-treated, hardened alloy, precision milled gears operate with planetary action. Gears are packed in a long-lasting, high pressure grease. Planetary gears are driven by an oversized cog-wheel, which is in turn driven by a cogged belt powered by the motor drive shaft. Cogged belt is a long-lasting, rugged fibre/rubber composite. This unique design yields high-torque mixing power while avoiding the high cost encountered repairing direct-drive transmission components.
Speeds
(Agitator rpm)
1. Low Speed 99
2. Intermediate Speed 176
3. High Speed 320
(Hub rpm)
1. Low Speed 41
2. Intermediate Speed 73
3. High Speed 133
Bowls and AgitatorsStandard equipment includes a 40Qt. (40L) high quality stainless steel bowl, dough hook, flat beater, and whip. A sturdy hand lever on the body column raises and lowers the bowl as well as locking in place at the top and bottom positions.
AttachmentStandard is the No. 12 hub for powering a standard size vegetable slicer/cheese shredder and a standard size meat mincer/grinder.
FinishTop (transmission cover): metallic bronze epoxy enamel
Bottom : metallic gray epoxy enamel
Shipping InformationN.W. 250kgs
G.W. 290kgs
Size: (L x W x H)Depth x Width x Height
75cm x 65cm x 131cm
FEATURES


Cartons are affixed to an undersized skid (pallet), the weight and dimensions of this skid are not included above and may vary from shipment to shipment.




SP-50HA

Motor2 h.p. (1500W), grease packed ball bearing, air-cooled, 230V/50Hz/1Ph, 220V/380V/3Ph
ControlsSpar Mixer controls are front-mounted to give easy access in cramped kitchen environments. The following controls are standard on all Spar Mixers: separate start and emergency stop buttons so operators can shut down the mixer immediately in an emergency situation, a 15-minute timer which shuts off the machine after set time has elapsed, and thermal overload protection
Cord and PlugBoth single phase and three phase are hard wired
TransmissionHeat-treated, hardened alloy, precision milled gears operate with planetary action. Gears are packed in a long-lasting, high pressure grease. Planetary gears are driven by an oversized cog-wheel, which is in turn driven by a cogged belt powered by the motor drive shaft. Cogged belt is a long-lasting, rugged fibre/rubber composite. This unique design yields high-torque mixing power while avoiding the high cost encountered repairing direct-drive transmission components.
Speeds
(Agitator rpm)
1. Low Speed 99
2. Intermediate Speed 176
3. High Speed 320
(Hub rpm)
1. Low Speed 41
2. Intermediate Speed 73
3. High Speed 133
Bowls and AgitatorsStandard equipment includes a 50Qt. (50L) high quality stainless steel bowl, dough hook, flat beater, and whip. A sturdy hand lever on the body column raises and lowers the bowl as well as locking in place at the top and bottom positions.
AttachmentStandard is the No. 12 hub for powering a standard size vegetable slicer/cheese shredder and a standard size meat mincer/grinder.
FinishTop (transmission cover): metallic bronze epoxy enamel
Bottom : metallic gray epoxy enamel
Shipping InformationN.W. 270kgs
G.W. 310kgs
Size: (L x W x H)Depth x Width x Height
75cm x 65cm x 131cm
FEATURES


Cartons are affixed to an undersized skid (pallet), the weight and dimensions of this skid are not included above and may vary from shipment to shipment.




SP-60HA

Motor3 h.p. (1500W), grease packed ball bearing, air-cooled, 230V/50Hz/1Ph, 220V/380V/3Ph
ControlsSpar Mixer controls are front-mounted to give easy access in cramped kitchen environments. The following controls are standard on all Spar Mixers: separate start and emergency stop buttons so operators can shut down the mixer immediately in an emergency situation, a 15-minute timer which shuts off the machine after set time has elapsed, and thermal overload protection
Cord and PlugBoth single phase and three phase are hard wired
TransmissionHeat-treated, hardened alloy, precision milled gears operate with planetary action. Gears are packed in a long-lasting, high pressure grease. Planetary gears are driven by an oversized cog-wheel, which is in turn driven by a cogged belt powered by the motor drive shaft. Cogged belt is a long-lasting, rugged fibre/rubber composite. This unique design yields high-torque mixing power while avoiding the high cost encountered repairing direct-drive transmission components.
Speeds:(Agitator rpm), (Slicer/Grinder rpm)
1. Low Speed 99, 60
2. Intermediate Speed 176, 108
3. High Speed 320, 197
Bowls and AgitatorsStandard equipment includes a 60Qt. (60L) high quality stainless steel bowl, dough hook, flat beater, and whip. A sturdy hand lever on the body column raises and lowers the bowl as well as locking in place at the top and bottom positions.
AttachmentStandard is the No. 12 hub for powering a standard size vegetable slicer/cheese shredder and a standard size meat mincer/grinder.
FinishTop (transmission cover): metallic bronze epoxy enamel Bottom : metallic gray epoxy enamel
Shipping InformationN.W. 270kgs
G.W. 310kgs
Size: (L x W x H)Depth x Width x Height
75cm x 65cm x 131cm
FEATURES


Cartons are affixed to an undersized skid (pallet), the weight and dimensions of this skid are not included above and may vary from shipment to shipment.




SP-A80HI / SP-B80HI

Motor3 h.p. (1/8HP:automatic:optional), grease packed ball bearing, air-cooled,220/380/415V/60HZ,3PH
ControlsSpar Mixer controls are front-mounted to give easy access in cramped kitchen environments. The following controls are standard on all Spar Mixers: separate start and emergency stop buttons so operators can shut down the mixer immediately in an emergency situation, a 15-minute timer which shuts off the machine after set time has elapsed, and thermal overload protection
Cord and Plug6 ft. flexible three wire cord and ground prong.
TransmissionHeat-treated, hardened alloy, precision milled gears operate with planetary action. Gears are packed in a long-lasting, high pressure grease. Planetary gears are driven by an oversized cog-wheel, which is in turn driven by a cogged belt powered by the motor drive shaft. Cogged belt is a long-lasting, rugged fibre/rubber composite. This unique design yields high-torque mixing power while avoiding the high cost encountered repairing direct-drive transmission components.
Speeds
(Agitator rpm)
1st gear 69
2nd gear 121
3rd gear 204
4rt gear 356
(Hub rpm)
1st gear 67
2nd gear 118
3rd gear 198
4rt gear 349
Bowls and AgitatorsStandard equipment includes a 80 Qt. (I.D.50 x H46.8 x TH2 cm) high quality stainless steel bowl, dough hook, flat beater, and whip. A sturdy hand lever on the body column raises and lowers the bowl as well as locking in place at the top and bottom positions.
AttachmentHub, Meat Mincer, Vegetable Slicer Standard is the No. 12 hub for powering a standard size vegetable slicer/cheese shredder and a standard size meat mincer/grinder.
FinishTop (transmission cover): metallic bronze epoxy enamel
Bottom : metallic gray epoxy enamel
Shipping InformationGross 455 kg
Net 550 kg
Size: (L x W x H)Depth x Width x Height
108cm x 79cm x 156cm
FEATURES


Cartons are affixed to an undersized skid (pallet), the weight and dimensions of this skid are not included above and may vary from shipment to shipment.shipment to shipment.







JMCool Solutions,Inc.